(Note: Updated inundation maps for 1:2 to 1:1000 floods are available from Alberta Environment and Parks (2020). The new draft maps can be viewed here: https://floods.alberta.ca/?app_code=FI&mapType=Draft)
These inundation maps show whether a property is at risk for various sized river floods. The size of flood shown on this map has a 1/200 or a 0.5% chance of occurring in any year.
The three distinct types of inundation shown on the maps are:
o Inundation - Area flooded overland due to riverbank overtopping.
o Isolated - Low lying areas that will not be wet from riverbank overtopping, but may experience groundwater seepage or stormwater backup.
o Protected - Area protected by a permanent flood barrier.
The flood areas shown are based on Alberta Environment and Parks most recent (2020) inundation maps. There is uncertainty inherent in predicting the effects of flood events, and this uncertainty increases for floods with less than a 1% chance of occurrence in any year. Any use of this data must recognizing the uncertainty with regards to the exact location and extent of flooding.
More information on flood mapping for Calgary is available at https://calgary.ca/flood
For Calgary's River Flood story, see: https://maps.calgary.ca/RiverFlooding/

This dataset identifies the Natural Water Bodies on lands under Calgary Parks Stewardship. It can be a flowing type of water i.e. STREAM or some type of body of water i.e. NATURAL POND. Types of WATER BODIES are: CREEK – CONSTRUCTION, NATURAL CREEK OR STREAM, NATURAL RIVER, OXBOW, NATURAL LAKE, NATURAL POND, SPRING, and WETLAND.

This dataset contains results from the City of Calgary's Wastewater Treatment Plants that are reported monthly to Alberta Environment and Protected Areas. Results include laboratory and flow data for the wastewater treatment plants’ treated effluents, 2007 to present. Sampling locations have been added, removed, or modified over time. All laboratory results have been determined from the daily 24-hour composite samples, with the exception of Fecal Coliforms which are determined from the grab sampling.

The City of Calgary uses approved and documented analytical testing methodologies, and the City of Calgary laboratory is accredited to the ISO/IEC 17025 standard. Quality Assurance programs track and ensure consistent laboratory performance. Changes in data over time, such as method detection limits, accredited testing parameters, and formatting are the result of newer analytical techniques and improved data quality standards.

This digital data set identifies, maps, and classifies ephemeral and intermittent streams in Calgary. This data set is intended for mapping at scales between 1:5,000 and 1:50,000, for the purpose of higher-level analysis and planning, or as a starting point to locate areas of interest to focus more detailed field work and surveys. Please note that the data is not intended to replace or supercede existing requirements during the process of planning, subdivision, and development, including field investigations. For further details and definitions, please refer to the attached user guide.

“This dataset contains building energy and greenhouse gas emission performance information for a subset of properties owned and operated by the City of Calgary. All energy and greenhouse gas emission metrics are calculated by ENERGY STAR Portfolio Manager using monthly, whole-building energy consumption data billed between January 1st and December 31st.

All blank cells in the dataset correspond to data points that are "not available" because they do not exist or cannot be calculated.”

Step lines define the regulatory flood elevation levels within the floodway/flood fringe. The official designated flood elevation indicated by the text applies within the section of the river between the two lines (one upstream and one downstream) where the number is written. An annotation file with the elevations is provided separately as an attachment: (Bylaw Flood Hazard Annotations).
These flood elevations reference Calgary’s Regulatory Flood Map (available separately). The Regulatory Flood Map shows the floodway, flood fringe and overland flood zones. The map is used for land planning purposes, showing the designated flood zones where various development and building regulations apply. The map shows the regulatory flood zones for the Bow River, Elbow River, Nose Creek and West Nose Creek.

For more on the development and building regulations that apply in each designated flood zone, please refer to Calgary’s Land Use Bylaw, Part 3 Division 3. http://www.calgary.ca/PDA/pd/Pages/Calgary-Land-Use-bylaw-1P2007/Calgary-Land-Use-Bylaw-1P2007.aspx

Are you building or renovating?
If you are building or renovating, check the regulatory flood map on this page, and the 1:100 year inundation map (from Flooding in Calgary: Maps http://www.calgary.ca/UEP/Water/Pages/Flood-Info/Calgary-flood-maps/Flood-maps.aspx) to see if your property is in a flood risk zone. Since late 2011, property owners have been advised of both the official designated flood elevation per the Land Use Bylaw (based on this regulatory flood map) and the most up to date recommended flood elevation (based on the updated 1:100 year inundation map) for their specific property.

This dataset is compiled from The City of Calgary’s in situ (in location) water quality monitoring program. In situ field measurements are acquired from the deployment of multi-parameter sondes in surface waters by The City of Calgary. Measurements are collected using two methods: Continuous and Discrete.
Continuous: In situ measurements logged at regular intervals (e.g. 15 minutes) for an extended period of time.
Discrete: Individual in situ measurements manually collected by a field technician.
Parameters that are measured include, but are not limited to: dissolved oxygen, water temperature, pH, turbidity, and specific conductance. Monitoring locations, intervals, and water quality parameters vary per site and period, depending on the monitoring objectives at the time of deployment. Multi-parameter sondes are routinely calibrated as per manufacturer’s specifications and verified against independent standards.

This data is not a live data feed. It is manually retrieved, reviewed, and posted at regular intervals. Field data is not altered or adjusted, though any data that is determined to be invalid based on sensor interference, sensor failure, or damage, has been removed from the final dataset.

Monitoring records are reported in the local time zone at the time of measurement for Calgary, Alberta (MDT/MST).

This data set contains the community-wide greenhouse gas emissions over time. The emissions are broken down by sector (e.g. transportation, waste, etc.), and by emissions source (residential buildings, commercial buildings, on-road transportation, etc).

(Note: Updated inundation maps for 1:2 to 1:1000 floods are available from Alberta Environment and Parks (2020). The new draft maps can be viewed here: https://floods.alberta.ca/?app_code=FI&mapType=Draft)

These inundation maps show whether a property is at risk for various sized river floods. The size of flood shown on this map has a 1/5 or a 20% chance of occurring in any year.

The three distinct types of inundation shown on the maps are:
o Inundation - Area flooded overland due to riverbank overtopping.
o Isolated - Low lying areas that will not be wet from riverbank overtopping, but may experience groundwater seepage or stormwater backup.
o Potential failure of flood protection barrier - Low lying areas that could be flooded if an existing permanent flood protection barrier were to fail.

The flood areas shown were mapped in 2015 jointly by Alberta Environment and Parks and the City of Calgary, using the best available hydrologic and hydraulic data and models. As such, the flooding shown reflects 2015 conditions, hydrology and topography. The effects of mitigation measures (changes to reservoirs/dams or barriers) built since 2015 are not included. There is uncertainty inherent in predicting the effects of flood events, and this uncertainty increases for floods with less than a 1% chance of occurrence in any year. Any use of this data must recognizing the uncertainty with regards to the exact location and extent of flooding.

More information on flood mapping for Calgary is available at https://calgary.ca/flood
For Calgary's River Flood story, see: https://maps.calgary.ca/RiverFlooding/

Information about Calgary's urban forest, including the locations and types of trees on public land. To learn more, visit the Urban Forest Management map.