(Note: Updated inundation maps for 1:2 to 1:1000 floods are available from Alberta Environment and Parks (2020). The new draft maps can be viewed here: https://floods.alberta.ca/?app_code=FI&mapType=Draft)

These inundation maps show whether a property is at risk for various sized river floods. The size of flood shown on this map has a 1/5 or a 20% chance of occurring in any year.

The three distinct types of inundation shown on the maps are:
o Inundation - Area flooded overland due to riverbank overtopping.
o Isolated - Low lying areas that will not be wet from riverbank overtopping, but may experience groundwater seepage or stormwater backup.
o Potential failure of flood protection barrier - Low lying areas that could be flooded if an existing permanent flood protection barrier were to fail.

The flood areas shown were mapped in 2015 jointly by Alberta Environment and Parks and the City of Calgary, using the best available hydrologic and hydraulic data and models. As such, the flooding shown reflects 2015 conditions, hydrology and topography. The effects of mitigation measures (changes to reservoirs/dams or barriers) built since 2015 are not included. There is uncertainty inherent in predicting the effects of flood events, and this uncertainty increases for floods with less than a 1% chance of occurrence in any year. Any use of this data must recognizing the uncertainty with regards to the exact location and extent of flooding.

More information on flood mapping for Calgary is available at https://calgary.ca/flood
For Calgary's River Flood story, see: https://maps.calgary.ca/RiverFlooding/

Data provided through this web app is provisional and preliminary in nature. Data is automatically generated by remote equipment that may not be under control of the Government of Alberta. This data has not been reviewed or edited for accuracy and may be subject to significant change when reviewed or corrected. Please exercise caution and carefully consider the provisional nature of the information provided. The Government of Alberta assumes no responsibility for the accuracy or completeness of this data and any use of it is therefore entirely at your own risk.

(Note: Updated inundation maps for 1:2 to 1:1000 floods are available from Alberta Environment and Parks (2020). The new draft maps can be viewed here: https://floods.alberta.ca/?app_code=FI&mapType=Draft)

These inundation maps show whether a property is at risk for various sized river floods. The size of flood shown on this map has a 1/10 or a 10% chance of occurring in any year.

The three distinct types of inundation shown on the maps are:
o Inundation - Area flooded overland due to riverbank overtopping.
o Isolated - Low lying areas that will not be wet from riverbank overtopping, but may experience groundwater seepage or stormwater backup.
o Potential failure of flood protection barrier - Low lying areas that could be flooded if an existing permanent flood protection barrier were to fail.

The flood areas shown were mapped in 2015 jointly by Alberta Environment and Parks and the City of Calgary, using the best available hydrologic and hydraulic data and models. As such, the flooding shown reflects 2015 conditions, hydrology and topography. The effects of mitigation measures (changes to reservoirs/dams or barriers) built since 2015 are not included. There is uncertainty inherent in predicting the effects of flood events, and this uncertainty increases for floods with less than a 1% chance of occurrence in any year. Any use of this data must recognizing the uncertainty with regards to the exact location and extent of flooding.

More information on flood mapping for Calgary is available at https://calgary.ca/flood
For Calgary's River Flood story, see: https://maps.calgary.ca/RiverFlooding/

This list of 18 Water Level and Flow monitoring stations along the South Saskatchewan River Basin (Bow and Elbow River watersheds) is derived from a much larger repository of sites in Alberta. Select sites upstream of Calgary as well as sites in Calgary are included. This data is collected from remote monitoring stations and therefore is not thoroughly checked for accuracy. This is intended for preliminary analytical purposes and is subject to change.

(Note: Updated inundation maps for 1:2 to 1:1000 floods are available from Alberta Environment and Parks (2020). The new draft maps can be viewed here: https://floods.alberta.ca/?app_code=FI&mapType=Draft)

These inundation maps show whether a property is at risk for various sized river floods. The size of flood shown on this map has a 1/100 or a 1% chance of occurring in any year.

The three distinct types of inundation shown on the maps are:
o Inundation - Area flooded overland due to riverbank overtopping.
o Isolated - Low lying areas that will not be wet from riverbank overtopping, but may experience groundwater seepage or stormwater backup.
o Potential failure of flood protection barrier - Low lying areas that could be flooded if an existing permanent flood protection barrier were to fail.

The flood areas shown were mapped in 2015 jointly by Alberta Environment and Parks and the City of Calgary, using the best available hydrologic and hydraulic data and models. As such, the flooding shown reflects 2015 conditions, hydrology and topography. The effects of mitigation measures (changes to reservoirs/dams or barriers) built since 2015 are not included. There is uncertainty inherent in predicting the effects of flood events, and this uncertainty increases for floods with less than a 1% chance of occurrence in any year. Any use of this data must recognizing the uncertainty with regards to the exact location and extent of flooding.

More information on flood mapping for Calgary is available at https://calgary.ca/flood
For Calgary's River Flood story, see: https://maps.calgary.ca/RiverFlooding/

This is data collected from the sanitary sewer system by area velocity type open channel flow meters.
*QAQC'd data that has been finalized is tagged as '1' under the Edited column.*

(Note: Updated inundation maps for 1:2 to 1:1000 floods are available from Alberta Environment and Parks (2020). The new draft maps can be viewed here: https://floods.alberta.ca/?app_code=FI&mapType=Draft)

These inundation maps show whether a property is at risk for various sized river floods. The size of flood shown on this map has a 1/50 or a 2% chance of occurring in any year.

The three distinct types of inundation shown on the maps are:
o Inundation - Area flooded overland due to riverbank overtopping.
o Isolated - Low lying areas that will not be wet from riverbank overtopping, but may experience groundwater seepage or stormwater backup.
o Potential failure of flood protection barrier - Low lying areas that could be flooded if an existing permanent flood protection barrier were to fail.

The flood areas shown were mapped in 2015 jointly by Alberta Environment and Parks and the City of Calgary, using the best available hydrologic and hydraulic data and models. As such, the flooding shown reflects 2015 conditions, hydrology and topography. The effects of mitigation measures (changes to reservoirs/dams or barriers) built since 2015 are not included. There is uncertainty inherent in predicting the effects of flood events, and this uncertainty increases for floods with less than a 1% chance of occurrence in any year. Any use of this data must recognizing the uncertainty with regards to the exact location and extent of flooding.

More information on flood mapping for Calgary is available at https://calgary.ca/flood
For Calgary's River Flood story, see: https://maps.calgary.ca/RiverFlooding/

(Note: Updated inundation maps for 1:2 to 1:1000 floods are available from Alberta Environment and Parks (2020). The new draft maps can be viewed here: https://floods.alberta.ca/?app_code=FI&mapType=Draft)

These inundation maps show whether a property is at risk for various sized river floods. The size of flood shown on this map has a 1/20 or a 5% chance of occurring in any year.

The three distinct types of inundation shown on the maps are:
o Inundation - Area flooded overland due to riverbank overtopping.
o Isolated - Low lying areas that will not be wet from riverbank overtopping, but may experience groundwater seepage or stormwater backup.
o Potential failure of flood protection barrier - Low lying areas that could be flooded if an existing permanent flood protection barrier were to fail.

The flood areas shown were mapped in 2015 jointly by Alberta Environment and Parks and the City of Calgary, using the best available hydrologic and hydraulic data and models. As such, the flooding shown reflects 2015 conditions, hydrology and topography. The effects of mitigation measures (changes to reservoirs/dams or barriers) built since 2015 are not included. There is uncertainty inherent in predicting the effects of flood events, and this uncertainty increases for floods with less than a 1% chance of occurrence in any year. Any use of this data must recognizing the uncertainty with regards to the exact location and extent of flooding.

More information on flood mapping for Calgary is available at https://calgary.ca/flood
For Calgary's River Flood story, see: https://maps.calgary.ca/RiverFlooding/

(Note: Updated inundation maps for 1:2 to 1:1000 floods are available from Alberta Environment and Parks (2020). The new draft maps can be viewed here: https://floods.alberta.ca/?app_code=FI&mapType=Draft)

These inundation maps show whether a property is at risk for various sized river floods. The size of flood shown on this map has a 1/200 or a 0.5% chance of occurring in any year.

The three distinct types of inundation shown on the maps are:
o Inundation - Area flooded overland due to riverbank overtopping.
o Isolated - Low lying areas that will not be wet from riverbank overtopping, but may experience groundwater seepage or stormwater backup.
o Potential failure of flood protection barrier - Low lying areas that could be flooded if an existing permanent flood protection barrier were to fail.

The flood areas shown were mapped in 2015 jointly by Alberta Environment and Parks and the City of Calgary, using the best available hydrologic and hydraulic data and models. As such, the flooding shown reflects 2015 conditions, hydrology and topography. The effects of mitigation measures (changes to reservoirs/dams or barriers) built since 2015 are not included. There is uncertainty inherent in predicting the effects of flood events, and this uncertainty increases for floods with less than a 1% chance of occurrence in any year. Any use of this data must recognizing the uncertainty with regards to the exact location and extent of flooding.

More information on flood mapping for Calgary is available at https://calgary.ca/flood
For Calgary's River Flood story, see: https://maps.calgary.ca/RiverFlooding/

Step lines define the regulatory flood elevation levels within the floodway/flood fringe. The official designated flood elevation indicated by the text applies within the section of the river between the two lines (one upstream and one downstream) where the number is written. An annotation file with the elevations is provided separately as an attachment (see "About" menu).
These flood elevations reference Calgary’s Regulatory Flood Map (available separately). The Regulatory Flood Map shows the floodway, flood fringe and overland flood zones. The map is used for land planning purposes, showing the designated flood zones where various development and building regulations apply. The map shows the regulatory flood zones for the Bow River, Elbow River, Nose Creek and West Nose Creek.

For more on the development and building regulations that apply in each designated flood zone, please refer to Calgary’s Land Use Bylaw, Part 3 Division 3. http://www.calgary.ca/PDA/pd/Pages/Calgary-Land-Use-bylaw-1P2007/Calgary-Land-Use-Bylaw-1P2007.aspx

Are you building or renovating?
If you are building or renovating, check the regulatory flood map on this page, and the 1:100 year inundation map (from Flooding in Calgary: Maps http://www.calgary.ca/UEP/Water/Pages/Flood-Info/Calgary-flood-maps/Flood-maps.aspx) to see if your property is in a flood risk zone. Since late 2011, property owners have been advised of both the official designated flood elevation per the Land Use Bylaw (based on this regulatory flood map) and the most up to date recommended flood elevation (based on the updated 1:100 year inundation map) for their specific property.